A blocked drain can cause a lot of discomfort and inconvenience especially if the situation gets worse. A blocked drain can either be in the bathroom or the kitchen, which are the two areas where we spend a lot of time. Both these areas can be a breeding ground for various illnesses and germs. This is why you should be aware of the symptoms of blocked drains so that you can immediately have the right drain maintenance and repair performed to prevent any further damage. Here are some of the symptoms you need to look out for when assessing the situation.
The first symptom is when the drain becomes dirty over a period of time. It could be because of frequent washing or even accidental spilling of food items onto the toilet paper. In this case, it would be necessary to have the drains cleaned thoroughly using warm water and strong cleaners. Use an old toothbrush and scrub off the dirt. If there are still residual traces of dirt, repeat the cleaning process until you are left with nothing more than a pile of the dirty drain.
Next on the list is when the flow of urine and the flow of waste from the toilet are almost identical. You may have noticed this when you were a kid going potty. As you grow up, this usually goes away but if not checked, you may experience these symptoms again especially if you have small children or elderly members in the house who are prone to such accidents.
Another symptom is when the drains become infected. For example, if you have fleas on your dog and you are trying to wash the animal but they are getting into the drain, that’s a sign of an infection. If this goes on, it’s time to check the drain for any other infections that could be causing the same problem. Sometimes, a blocked drain is caused by a hair that’s been stuck to the end of a rag for too long causing debris and roots to enter the pipes and causes a jam.
Lastly, you may notice when the water never drains properly. This is a very annoying and costly problem because it often requires the services of a plumber. If you do experience problems with drains, the best thing to do is to take action before the problem becomes serious and leaves you with a clogged drain for many days. This is one of the most common symptoms and can include anything from a leaking toilet or sink to clogged garbage disposal. Sometimes, the pipes will just run dry for no apparent reason, but if this happens to you, it is imperative to repair the pipe immediately and get the problem taken care of.
These symptoms of blocked drains can occur anywhere in the home. They are not isolated to the bathroom or toilet but can affect any part of the home. It is important to know what the symptoms of a blocked drain are so you can act quickly to prevent the accumulation of any further problems. This way, you will be able to enjoy your home’s features and amenities without any worries about drains.
Plumbing blocked drains can truly be irritating, frustrating, and even potentially dangerous. When your pipes become clogged, it’s frustrating because it seems like the problem is never going to go away. However, the thing is, there are actually quite simple ways to unclog your own drains should they have become clogged by debris or age. If you’ve come across problems with drainage in which you require pipe re-lining, be certain to contact a local plumber for help. In the meantime, learn the basics of how to unclog drains yourself.
To clear a blocked drain, it’s important to remember that prevention is better than cure. By taking preventative measures like regularly cleaning out the tub and ensuring that it always has a clean opening, clots won’t form and your pipes will stay cleaner for longer. In the case of a kitchen or bathroom sink, you can use a plunger to try to unstop a blocked drain. For toilets, however, a more drastic solution is needed: boiling water.
It’s important to realize that boiling water is extremely hot, even for individuals who may use propane warmers. Therefore, a room away from a hot water heater is essential, as heat rises and can actually cause a blocked drain. Before using the boiling water method, it’s important that you read all the precautions associated with it carefully. Some people do not recommend using hot water to unclog drains. If this is something that would work for you, then make sure that you keep the temperatures low enough to avoid harm.
Once you’ve read the warnings and precautions associated with boiling water, you can feel free to try it on your own. Fill the sink up with hot water and pour in a tablespoon or two into each drain. It’s important to be patient here, so don’t panic if the first few drains are difficult to unstop. When you begin to see the water rising from the drain, put a cup of ice in the drain, and wait for the water to go down. The ice should help to lower the temperature of the water, which should in turn loosen the blockage.
Finally, if the hot water isn’t working for you and your blocked drain is in a sewer or storm drain, then you’ll need to find out where the blockage is coming from before calling a plumber to come to take care of the issue. The most common way to clear a Sydney blocked drain is to use an old auger, which is similar to a sewer snake. A Sydney plumber can get into the drain and clear out the blockage, but this can be dangerous since some drain pipes are so narrow that a normal auger can’t get into them. A better option is to use a plumbing snake, which is specifically made to get under the blocked drainpipes and clear out the clog.
Another less commonly used method of clearing a Sydney blocked drain is to use a jet blaster. Like a standard jet blaster, it works by blasting water at the blockage, whether it’s in a sewer storm drain or stormwater drain. Unlike a plumbing snake or auger, it doesn’t require much work in order to use a jet blaster. In fact, you might be surprised at how much time it actually takes to clear a Sydney blocked drain!